Gaochuang CNC Equipment

Air compressor plasma power

Home »  Products »  Plasma power »  Air compressor plasma power

Air compressor plasma power

Product Application


LG-40/LG-63/LG-80/LG100 built-in air pump type inverter air plasma cutting machine is our exclusive for mobile operation, outdoor installation and narrow space and other users to develop new products. Completely changed the original plasma arc cutting machine generally need to configure air compressor with the mode of use. Using foreign special power devices and the latest inverter control IC development and production of high-tech products, it not only in the cutting thickness, slit finish, arc easy to carry out, cutting current continuously adjustable far ahead of traditional products and other inverter cutting machine

Product details


Condition:New
Place of Origin:Shandong, China (Mainland)
Brand Name:Gaochuang
Voltage:380V
Rated Power:50w
Dimension(L*W*H):530*335*510mm
Weight:50KG
Certification:CE
Warranty:1 Year
Name:Air compressor plasma power source
Application:Sheet Metal
Color:Blue, Yellow

ModelLG-40zLG-63LG-80LG-100
electric voltage3 phase 380V±10%3 phase 380V±10%3 phase 380V±10%3 phase 380V±10%
 input current12.5A12.5A12.5A21A
output current40A63A80A100A
current adjustable range20-40A20-63A20-80A20-100A
rated no-load voltage300V330V//
Continuous load rating60%60%60%60%
ArcUntouched arc strikingUntouched arc strikingUntouched arc strikingUntouched arc striking
Air pressure force0.3--0.6Mpa0.3-0.6Mpa0.3-0.6Mpa0.3-0.6Mpa
Optimum cutting thickness≤5mm≤15mm≤15mm≤25mm
10Maximum cutting thickness10mm25mm25mm35mm
Gas delay time6s6s6s6s
Weight38kg45kg45kg50kg
dimensions (length * width * height)530*335*510mm630*335*560mm630*335*560mm700*335*560mm

Advantage


portable, energy-saving, low noise, built-in compressor maintenance-free, and with three phase missing phase and three phase fault phase automatic protection function, high reliability. It only USES three phase 380V power supply can work, cutting cost is low, can cut stainless steel, copper, aluminum, titanium, cast steel, alloy steel, carbon steel, composite metal and all other metal materials. Cut-40/63/80/100 also adds the function of manual welding with welding rods, which can be used in one machine.

Operation method:


1. Connect the input cable to the three-phase 380V power supply, and note that the section of the power line connecting the input cable should be greater than 2.5 square mm.

2. Close the power switch of the cutting machine, the power indicator is on, and the cooling fan works; Set the function switch to the position of "gas detection", the built-in air pump will start, and there should be air ejection on the cutting torch. If the air pump is not started successfully, it may be that the phase of the power input is connected wrong, please replace any two positions of the live wire, or it may be a three-phase missing phase, please check whether the power input is missing phase;

3. Put the function switch in the position of "cutting", press the switch of cutting torch handle, and the cutting torch should be equally pneumatic.

4, according to the cutting workpiece thickness and material, select the appropriate current and cutting speed.

5. Cutting:
With a P80 non-contact cutting gun, hold the cutting torch to the starting position, aim the nozzle at the cutting workpiece, tilt the cutting torch forward by 15 degrees, and press the cutting torch handle switch. After the workpiece penetrates, start moving the cutting torch; After cutting, release the handle switch.

6. Welding: place the function switch in the position of "manual arc welding", remove the plasma cutting gun, insert the quick connection of welding handle into the socket of "welding handle wire", adjust the appropriate current and start welding.

With a P80 non-contact cutting gun, hold the cutting torch to the starting position, aim the nozzle at the cutting workpiece, tilt the cutting torch forward by 15 degrees, and press the cutting torch handle switch. After the workpiece penetrates, start moving the cutting torch; After cutting, release the handle switch.

In order to protect the safety of equipment and personnel, please ensure that the user must choose the correct protective grounding according to their own power supply system: connect the 4mm2 wire with the cutting machine's protective grounding end!